Tuesday, November 16, 2010

How do you reset a ford mondeo key fob after battery change?

I have just bought a1995 ford mondeo for my husband, the battery was dead in the key fob, so i have changed it, but now i cant find out how to reset it to get it to work. Anybody have experience ?

It is a two button key fob.How do you reset a ford mondeo key fob after battery change?
Just been trying to do mine for last 2hours. Tried various forums and other web sites - none were correct. Finally had success with OKLATOM's suggestion on this site! (See entry above) Cheers.How do you reset a ford mondeo key fob after battery change?
I heard that putting it in the freezer works, but can't be sure. You'd need to put it in probably for 12-24 hours. You could try the Hanes Manual for it too...They're very detailed...
Try here ... http://www.fordmondeo.org
in most fords, you have to turn the ignition form off to run back and forth about 8 times until the doors lock, leaving the key in the run position, then press any button on the remote and then turn the key back to off.
FORD Mondeo 93%26gt; Mondeo 96%26gt; (Infrared 2 Button) - Key Remote Programming



1. Unlock Vehicle, and turn ignition to position 1.



2. Wait until the PATS LED illuminates (app 10 seconds)



3. Switch Ignition to 0 ?within 5 seconds ?LED will remain on



4. Point the Remote at one of the front Receivers



5. Press a button and keep pressed ?within 20 seconds of step 3



6. When the LED on the Key lights press the other button 3-5 times



7. Release both buttons while still aiming at the receiver



8. If successful, both LED檚 will flash 5 times



9. Repeat 5? for additional transmitters (within 30 seconds)



10 .When completed, Turn Ignition to II then 0 to store the Keys
Ask the person who you bought it from.

or contact any ford dealer

No comments:

Post a Comment